Koshin and Honda SERH-50Z Motor Pump

This 2″ ultra-high-pressure motor pump is specifically designed for applications requiring exceptional vertical lift, reaching a maximum height of up to 90 meters. Equipped with a high-performance engine and a precision-engineered impeller, it is the ultimate tool for sprinkler irrigation systems on steep terrain, industrial pressure cleaning, and wildfire suppression support.

Specifications:

  • Max. operating pressure: 78.1 psi
  • Max. flow rate: 53 GPM

Enter your information to download the technical data sheet

Related Products

Wade Rain WR24 Mini Sprinkler

This low-trajectory impact sprinkler is specifically designed for precision irrigation applications requiring a 12-degree discharge angle to minimize wind drift. Equipped with a 2.5 mm purple nozzle, it delivers a uniform and efficient distribution pattern, making it the ideal tool for irrigating orchards, nurseries, or agricultural areas where controlling the spray range and protecting crops from excess moisture are crucial for land productivity.

Specifications:

  • Flow rate per sprinkler: 0.13 LPS
  • Operating pressure: 28.4

Irritec P1 hose 15MIL 30CM 1400m/roll

The 16 mm, 15-mil thick P1 tape offers superior resistance to mechanical damage and harsh environmental conditions. Its 1.1 L/h configuration with emitters spaced every 30 cm is ideal for projects requiring maximum service life; available in 1,400-meter rolls (Ref: FNFM150300B).

Specifications:

  • Flow rate per emitter: 1.1 L/h
  • Wall thickness (mil): 15
  • Operating pressure: 23.2

High-Tip Trailer CIVEMASA RACC-10500

Chassis built with a reinforced tubular structure featuring internal tubular reinforcements. Bi-articulated swiveling tractor hitch made of forged steel, with front and rear vertical adjustments to level the vehicle. Flanged drawbar with adjustments (offset and centering). Easily accessible swiveling drawbar support, requiring no disassembly. Elevator manufactured with 100 mm tubular profiles with reinforcements, pulley supports, and steel roller guides. Cast guide pulleys easily accessible for maintenance, with no need to disassemble the elevator.

Koshin and Honda KTH-80X C Motor Pump

This robust 3″ trash pump is specifically designed for heavy-duty construction and mining applications, allowing suspended solids up to 27 mm to pass through without clogging. Equipped with a high-performance engine and a heavy-duty cast iron housing, it is the ultimate solution for excavation dewatering, flood control, and the transfer of turbid water in the most demanding terrain conditions.

Specifications:

  • Max. operating pressure: 29.82
  • Max. flow rate: 185 GPM